Black; Lip Setting; Film Mode; Vic - Sharp LC-46D43U Aquos Operation Manual

Basic adjustment settings
Normal viewing mode
• "Film Mode" does not function when you set:
- the "AV Mode" to "Game" or
- the "liP Setting" to "Fast".
Provides high quality images with minimal dot crawl
and cross color noise.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Press
MENU
to display the MENU screen, and
then press .....
/~
to select "Picture".
Press
~.I~
to select "Advanced", and then
press
ENTER.
Press ..
/~
to select a specific adjustment
item, and then press ENTER.
• You can select "Color Temp.", "Black", "liP
Setting", "Film Mode", "30- Y IC", "Monochrome",
or "Range of OPC".
Press ..
/~
(or .....
/~)
to select the desired
parameter.
• See the table for the selectable parameters.
Press
MENU
to exit.
This "TV provides various advanced functions for
optimizing the picture quality.
Slow
For still images
Standard Normal adjustment
For a better white balance, use color temperature
correction.
Fast
Off (20)
For moving images
For Game Mode
High
Mid-High
Middle
Mid-Low
Low
White with Bluish tone
•
White with Reddish tone
• 30- Y IC is available for input signal from Composite Video
and analog broadcasts (air and cable) .
@-
26
- 16 through
+
15
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate
if
the adjustment range is
small.
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
+
16 and a minimum of - 16.
For viewing a video in monochrome.
Suitable for smooth images with low
amounts of flickers
• "liP Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 10801.
Converts input signals depending on the type of
images.
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.