Wood Top; Toe Panel; Cabinet - Maytag MDC4650AW Series Service Manual

Disassembly Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and discharge
capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require power to be
connected. Ensure all ground wires are connected before certifying unit as repaired and/or operational.

Wood Top

Removal
Portable dishwashers will have a top made of wood
composition core with a Formica™ laminated top and
sides. Use of Formica™ has a number of advantages
such as: superior moisture resistance, greater stain
resistance, durability and very low maintenance.
1. Disconnect power to the machine.
2. Remove the 2 screws securing the top to the
mounting flanges positioned under the top in front.
3. Carefully slide top forward to disengage spacer
washers from slots in the rear of the cabinet flanges.

Toe Panel

Removal
1. Disconnect power to the machine.
2. The Toe Panel is held by 2 screws, one each side.
Remove both screws.
18
!
WARNING

Cabinet

Removal
1. Disconnect power to the machine.
2. Remove Wood Top, see "Wood Top" removal
procedure.
3. Open door and remove 4 screws securing the front
flange of cabinet to the tub.
4. Remove toe panel , see "Toe Panel" removal
procedure.
5. Remove the 2 front cabinet screws that secure the
cabinet to the tub and base.
16026945
©2006 Maytag Services