Install Moisture Barrier (Under A Wood Countertop); Prepare Dishwasher - Maytag MDB7759AWW4 Installation Instructions Manual

Undercounter dishwasher stainless steel giant tub models
Table of Contents

Advertisement

Available languages

Available languages

Option D, No waste disposer - with air gap
!; ! ;_ __; i i;A¸! ii!!i;;; ;;ii; ¸ ; i ; ; i¸_:;I ; i _!;;;!;ii_i i;;;,
2.
3.3
Connect black end of drain hose to
air gap and cut if needed.
NOTE: Do not cut ribbed section.
Attach drain hose to air gap with
large silver drain hose clamp
(provided). Use pliers to squeeze
clamp open and move into position.
If the drain hose was cut, use a 1W'
to 2" (3.8 to 5.1 cm) screw-type
clamp (not provided).
Use a rubber hose (not provided)
with screw-type clamps (not
provided) to connect from waste tee
to air gap.
l_ _
_
_ 1/¸
_
nde ' a
od count®dop
Moisture
barrier
1=
2.
Make sure the area under the cabinet is clean and dry for
installation of the moisture barrier.
Remove the backing of the moisture barrier and apply to
underside of the countertop along the front edge of the
counter.
Tip Over Hazard
Do not use dishwasher
until completely installed.
Do not push down on open door.
Doing so can result in serious
injury or cuts.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Helpful Tip: Place cardboard under dishwasher until installed in
cabinet opening to avoid damaging floor covering. Do not use
door panel as a worktable without first covering with a towel to
avoid scratching the door panel.
Using 2 or more people, grasp sides of dishwasher door frame
and place dishwasher on its back.
Using a flat-blade screwdriver, turn the plastic fasteners 1/4turn to
unlock them. Remove panel. Do not remove tech sheet from
access panel.
11

Advertisement

Table of Contents
loading

Table of Contents