Safety Lock - Visioneer ROADWARRIOR 4D User Manual

®
V R W 4D
ISIONEER OAD ARRIOR
4. Remove the foam strip(s) from inside the scanner.
5. Gently close the scanner lid. Press down on both sides of the lid until you hear a click as the arms lock the
scanner lid in place.

Safety Lock

Your scanner may have a slot for installing a Kensington® style safety lock. This slot can be identified by the lock
icon. It is to the left of the USB port on the scanner. When following the instructions in this document, make sure
you connect the USB cable into the USB port which is identified by the USB symbol.
Use this slot to install a safety lock. Do
not attempt to insert any other type of
object.
A lock is not provided with the scanner and this document does not contain instructions on purchasing and
installing a safety lock. If you choose to use a safety lock, please carefully read the installation instructions
provided with the lock. More information about Kensington® locks can be found at www.kensington.com.
10
Use this slot to connect the provided micro
USB cable to the scanner. Do not use any
other type of USB cable. Do not attempt to
install a safety lock in this port.
W
ELCOME
S U ' G
CANNER SER S UIDE