Outside Temperature Gauge; Service Reminder Indicators And Warning Buzzers - Toyota 2003 MATRIX User Manual

Hide thumbs Also See for 2003 MATRIX:
Table of Contents

Advertisement

carownersmanual.net
carownersmanual.net
3. Trip meter reset knob—Resets the two
trip meters to zero, and also change
the meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
To reset the trip meter A to zero, dis-
play the meter A reading, then push
and hold the knob until the meter is
set to zero. The same process can be
applied for resetting the trip meter B.
86
'03 MATRIX_U (L/O 0201)

Outside temperature gauge

The outside temperature is indicated on
the display when the ignition switch is
on.
The displayed temperature ranges from
−30_C (−22_F) up to 50_C (122_F).
If there is any abnormality in the connec-
tion of the outside air temperature sensor,
"−−" will appear on the display. If "−−"
appears on the display, contact your Toyo-
ta dealer.
There may be a case that "−−" appears
momentarily when the ignition is quickly
turned to "ON". It is normal if it goes out
soon.
2003 MY COROLLA MATRIX_U (OM12767U)
Service reminder indicators
and warning buzzers
If the indicator or
Do this.
buzzer comes on...
(a)
If parking brake
is off, stop
or
immediately and
contact Toyota
dealer.
(b)
Fasten driver's
seat belt.
(indicator and buzzer)
(c)
Fasten front
passenger's seat
belt.
(d)
Stop and check.
(e)
Stop and check.

Advertisement

Table of Contents
loading

Table of Contents