Power Status Led - D-Link DAP-1520 Quick Start Setup Manual

1. Plug your WiFi Extender into a power outlet and wait for a blink-
ing amber status to show on the indicator LED

Power Status LED

Power Status LED
Solid Green Successfully connected to a network
Solid Red Device is booting up
Blinking Red The device is in recovery or the device malfuctioned
Blinking Amber Device is powered on, but not connected to a network
Off Device is not receiving power
3. Click on the Wireless Network Name (SSID) for your WiFi Extender
and connect. It will appear as a name closely resembling dlink-XXXX,
the last four characters vary by device. This will allow your computer
or mobile device to link to your new WiFi Extender.
These last four
characters will be
different with each
device
Locate your WiFi Configuration Note/Card for more information
on the exact Wireless Network Name (SSID) of your WiFi
Extender