Sony SPP-SS964 Service Manual page 15

Cordless telephone
Hide thumbs Also See for SPP-SS964:
Table of Contents

Advertisement

5. Link Establishment
According to the following Fig. 4-1, the requested side for link
establishment is the master.
The system have to exchange the A-Frame for link establishment,
and each system ID should be the same ID, and then the system
link is established.
The protocol and timing chart of link establishment are as fol-
lows.
Master
Time Slot
A
Master TX
Master RX
Slave RX
Slave TX
Trip Delay
6. State Change/Termination
After the RF link between HS and BS was established, a move-
ment of each state (State: ON-Hook, OFF-Hook, PAGE, InterCom,
etc) is sent through supervisory bits.
7. Error Recovery
In case of the following situation, The system becomes "Error
Recovery Mode".
(1) The system failed to move to "Heart-Beat" during "Stand-by
mode, or failed "link establishment".
(2) The system failed to keep the link.
TX
RX
A'
A
A'
Fig. 4-4. Link Establishment Timing Chart
Master
System ID
confirmed
Fig. 4-3. Link Establishment protocol
TX
RX
V
V
– 15 –
Slave
A-Frame
System ID
confirmed
A-Frame
V-Frame
V-Frame
V-Frame
V-Frame
TX
V
V
V
V
V

Advertisement

Table of Contents
loading

Table of Contents