MyWeigh 1Scale User Manual

5000g x 1g capacity kitchen scale

5000g X 1g CAPACITY KITCHEN SCALE

USER MANUAL

Thank you for purchasing the My Weigh ® 1-Scale ® digital scale. Please read all operating instructions carefully before use. This electronic scale

is a precision instrument. With normal care and proper treatment, it will provide years of reliable service. For more information please visit

www.myweigh.com

Never load the scale with more than the maximal capacity. Although the 1-Scale ® is designed to be extremely durable with extra overload

protection built into the case, overloading will permanently damage it! Avoid any exposure to extreme heat or cold, your scale works better

when operated at normal room temperature. Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and/or a close

proximity to other electronic equipment can all cause an adverse e ect on the reliability and accuracy of your scale. Handle with care. Gently

apply all items to be weighed onto tray top. Avoid shaking, dropping or otherwise shocking the scale. Scales are delicate instruments and unlike

cellular phones, scales have delicate sensors that determine how much an item weighs. If you drop or shock your scale, these sensors "feel" the

shock and are sometimes destroyed. This happens with all digital scales. We design our scales to be as resistant to shock or drops as possible,

however there is no way for us to protect 100% against load cell or sensor damage.

Failure to follow these instructions will void your warranty.

Always allow the scale to acclimate to normal room temperature for at least one hour before use. Give your scale su cient warm up time.

Usually 30-60 seconds before calibration to give the internal components a chance to stabilize.

1) Place the scale on a at hard surface.

2) Press and release the [ON/ZERO] key.

3) Wait until the displays shows "0".

4) Gently place the items to be weighed on the tray.

5) The weight will be displayed on the LCD.

6) Press [UNIT] to select the weighing mode (g or lb:oz).

7) Press [ON/ZERO] to deduct the weight of an item or container that is on the scale. The reading is now "0".

8) Turn the scale o by pressing the [ON/ZERO] key and hold it for 3 seconds.

Table of Contents

Do you have a question about the 1Scale and is the answer not in the manual?

Page 1: User Manual
With normal care and proper treatment, it will provide years of reliable service. For more information please visit www.myweigh.com Never load the scale with more than the maximal capacity. Although the 1-Scale ® is designed to be extremely durable with extra overload protection built into the case, overloading will permanently damage it! Avoid any exposure to extreme heat or cold, your scale works better when operated at normal room temperature.
Page 2 BATTERIES Low Batteries & bad battery connections are the #1 cause of scale malfunction and inaccuracy! We test all of our scale returns from consumers and 60% of them are battery related problems. This sounds silly but it's true! A scale will perform poorly when it has low batteries. Use good quality batteries &...