Fonts, Truetype Recall - SATO CL408 Operator And Technical Reference Manual

Memory Card Function

Fonts, TrueType Recall

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
SATO CL Series Printers
<ESC>BJRabbccddee,ffff.gg...g
<ESC>BJTaa,bb,cc,dd,ee,ffff,gg...g
a = Font ID (0 thru 9)
aa = Font ID (00 thru 99)
bb = Horizontal Expansion (01 thru 12)
cc = Vertical Expansion (01 thru 12)
dd = Character Pitch (01 thru 99)
ee = Reserved, always 00
f f f f = Number of characters to be printed using the font
gg..g = Data to be printed
Example: <ESC>BJR1020201000004SATO
Placement: Immediately following the <ESC>CC Slot Select
command.
Default: None
This command recalls previously stored TrueType fonts from a
Memory Card.
<ESC>A
<ESC>V0100<ESC>H0100<ESC>CC1<ESC>BJT01,02,02,01,00,0004,SATO
<ESC>Q1<ESC>Z
1. Thse commands requires the Memory Card option. See your SATO
representative for details.
2. The BJR command can only be used when 10 or fewer fonts are
being stored. For more than 10 fonts, the BJT command should
be used,
9001035 Rev. E
Section 4. Programming Reference
Page 4-85