Advertisement
Changing replay speed
To play records at 45 r.p.m. first remove the platter
(5). Using
the accessory
tool
provided (3a), hook
the belt (3) over the larger diameter part of the motor pulley
(2).
Refit the platter. To revert to 33
r.p.m.
repeat the proceedings using the
smaller
step on t he
pulley.
***
In addition, 78 r.p.m. is available after fitting a special pulley, which may be purchased as an
~
optional extra.
For detailed product information please refer to the Pro-Ject web site
www.project-audio.com.
Maintenance and cleaning
Your record player requires little or no regular
maintenance.
Remove dust with a slightly moistened
antistatic cloth. Never use a dry cloth because this
will
create static electricity which attract more dust!
Antistatic cleaning flu ids are available at special ist stores but must be applied sparingly to avoid
damage to rubber
parts.
It is recommended to fit the needle
cover
before clean ing or maintenance is
carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal
stretching.
'U17' Always disconnect the record player from the mains power supply as a precaution before
V
maintenance!
Fitting and connecting the cartridge
**
All cartridges with half inch mounting holes can be fitted. Leaving the needle's protection
cover
on,
fit the cartridge to the headshell using the screws supplied with the cartridge by passing one screw
through each slot in the headshell (21). Do not tighten the nuts yet.
Connect the tonearm wires to the cartridge pins as follows:
white
left channel positive (L +)
red
right channel pas. (R+)
green
right channel return (R -)
blue
left channel return (L -)
The full sound quality of the record player can only be achieved if the cartridge is correctly
adjusted.
Particular tools like the PRO-JECT alignment tool are required to accomplish th is
j
ob properly.
If
you are not
well
acquainted with the adjustment of cartridges you are advised to call upon the willing
help of you
r
PRO-JECT dealer to accomplish this task for you.
Please
note:
adjusting a cartridge and tonearm calls for the greatest care in order to avoid
damaging the cartridge or tonearm bearings. Leave this work to your dealer if you are in any
way unsure of the necessary steps and precautions to be
taken.
Useful tips
The lid is not only a dust cover but also a resonant structure likely to be excited by, and to pass into
the plinth, the acoustic energy emanating from your loudspeakers during replay. It is therefore
recommended that the lid be removed for optimum sound quality.
The record player should be positioned on a low-resonance surface such as wood or multiple layer ply
board to avoid structural vibrations disturbing replay.
6
©
Pro-Ject Audio Systems
·
Pro-Ject 1 Xpression Carbon Classic
I
Ortofon 2M SILVER
·
Revision 2014.01.03
Advertisement
