1-2. REAR COVER REMOVAL
1
Pull down the claw to release the Lamp Door
2
Remove the Lamp Door
3
Remove 11 screws (+BVTP2 4X16) (42" models),
13 screws (+BVTP2 4X16) (50" models),
to remove the Rear Cover
1
Lamp door
2
KF-42E200A/42E201A/50E200A/50E201A
When reassembling the rear cover, be sure to securely lock
the lamp door to avoid a lamp cover failure warning.
Lamp door
Turn the handle until it is in
the CLOSE position
Lamp door
KF-42E200A/42E201A/50E200A/50E201A
3
NOTE: The USB connector
is only to be used by Service
Technicians for the purpose
of upgrading software.
14