Canon PowerShot SX100 IS User Manual page 45

Components Guide
143
(indicators
The indicators on the back of the camera will light or blink under the
following conditions.
Green: Ready to shoot (camera beeps twice*)
Blinking Green: Image recording/reading/erasing/transferring (when
connected to a computer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
* When the camera focuses difficulty, it beeps once.
[power Saving Function
This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the power button again
to restore power.
Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after
Shooting Mode the last control is accessed even if [Auto Power
Down] is set to [Off]. (Press any button other
than the power button or change the camera
orientation to turn the LCD monitor back on.)
Playback Mode Powers down approximately 5 minutes after the
Connected to a Printer last control is accessed on the camera.
* This time can be changed.
•
IJ] •
The power saving function will not activate during an Auto
- Play or while the camera is connected to a computer.
• The power saving function settings can be changed (p. 49).