Canon PowerShot SX100 IS User Manual page 157

Print SellingslTransfer Sellings
1155
1
Select [Print Settings].
1. Press the
[E]
button.
2. Press the
~MENU~ button.
3. Use the .. or .. button to select the
~ menu.
4. Use the
+
or • button to select
[Print Settings].
5. Press the
@
button.
2
Accept the setting.
1. Use the
+
or • button to select
[Print Type], [Date], [File No.] or
[Clear DPOF data].
2. Use the" or .. button to select a
setting to configure.
3. Press the
II
MENU ))
button .
• The Date and File No. settings change according to the Print
Type as follows.
- [Index]
[Date] and [File No.] cannot be set to [On] at the same time.
- [Standard] or [Both]
[Date] and [File No.] can be set to [On] at the same time,
however, the printable information may vary between
printers.
• Printing more than two copies
1. Set [Print Type] in [Print Settings] to [Standard] or [Both].
2. Select [Select Images & Qty.], choose the image you wish
to print, and press the
FUNC.lSET
button.
3. Use the
+
or • buttons to set the number of copies.
• Images dated using
6
(Postcard Date Imprint mode) (p. 72)
are always printed with the date, regardless of the [Date]
setting. As a result, some printers may print the date twice on
these images if [Date] is also set to [On].
• Dates print in the style specified in the [Date/Time] menu
(p. 12).
•