Setting The Display Overlays - Canon PowerShot SX100 IS User Manual

Various Shooting Methods
1127
I
Setting the Display Overlays [iiJ
II
See Functions Available in Each Shooting Mode (p. 222).
* Only [Grid Lines] can be set.
You can display vertical and horizontal grid lines, a 3:2 print area
guide, or both on the LCD monitor while shooting to help check the
position of your subject.
Off
Grid Lines
3:2 Guide
Both
Displays grid lines to divide the screen into 9 parts. Helps
confirm the vertical and horizontal positioning of the subject.
Helps confirm the print area for a 3:2 print.
*
Areas outside the printable area are grayed out.
*
Images are still recorded at the standard aspect ratio of 4:3.
Displays both the grid lines and the 3:2 guide
simultaneously.
1
Select [Disp. Overlay].
1.
Press the
II
MENU ))
button.
2. In the
L!J
menu, use the ... or
+
button to select [Disp. Overlay].
•
2
Accept the setting.
1. Use the .. or .. button to select
[Off], [Grid Lines], [Both] or [3:2
Guide].
2. Press the
~
MENU )]
button.
• Only grid lines can be configured for the
Iii
or
1m
mode.
• The grid lines and 3:2 guide will not be recorded in the
image.