Page 1
EURO • Printed in Germany • BA 1 619 929 535 • GBH 5-40 DE • Titel (Vorderseite) • OSW 03/01 GBH 5-40 DE (535) - Vorderseite Seite 1 Montag, 26. März 2001 1:06 13 Bedienungsanleitung Operating Instructions Instructions d’emploi Instrucciones de servicio Manual de instruções...
4 Vibration damper Never allow children to use the machine. 5 On/Off switch Bosch is only able to ensure perfect function- 6 Speed selector thumbwheel ing of the machine if the original accessories 7 Service indicator intended for it are used.
Page 5
Intended Use Vibration damper The machine is designed for drilling in concrete, brick and stone as well as for chiselling. Changing the Tool The integrated vibration damper 4 reduces oc- curing vibrations. Before any work on the machine itself, pull the mains plug.
Switching On/Off in chiselling mode: Overload Clutch If the drill bit jams or edges, the drive to the drill spindle is interrupted. Due to the arising forces always hold the machine firmly with both hands and provide for a secure stance. Switching on: Press the upper part of the If the drilling tool jams, switch the machine off and On/Off switch 5 until it locks...
Page 7
Insert the chisel in the tool holder. only required during maintenance or repair by an Turn the mode selector switch 3 to “Changing authorized Bosch After-Sales Service. It is imper- the chiselling position” (Vario-lock). ative to use the designated Bosch oil.
Denham-Uxbridge In case of complaint please send the machine, GB-Middlesex UB 9 5HJ undismantled, to your dealer or the Bosch Serv- Service +44 (0) 18 95 / 83 87 82 ......ice Centre for electric power tools.