License Plate Lamp - GMC 2012 Terrain Owner's Manual

10-36 Vehicle Care
Back Up Lamp
Removal of the lamp assembly is
not required to replace the back-up
lamp bulb.
To replace one of these lamps:
1. Open the liftgate. See Liftgate
on page 2 9.
2. Remove the interior trim access
panel.
3. Turn the bulb socket
counterclockwise and pull it out.
4. Pull the bulb straight out of the
socket.
5. Install the new bulb.
6. Push the bulb socket in and turn
it clockwise.
7. Reinstall the interior trim access
panel.
I n f o r ma t i o n P r o v i d e d b y :

License Plate Lamp

To replace one of these bulbs:
1. Open the liftgate partway. See
Liftgate on page 2 9.
Passenger Side Shown, Driver
Side Similar
2. Push the left end of the lamp
assembly toward the right.
3. Pull the lamp assembly down to
remove it from the liftgate.