GMC 2012 Terrain Owner's Manual page 201

Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re dial: This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Using the Re dial Command
1. Press / . The system
responds Ready, followed by
a tone.
2. After the tone, say Re dial. The
system dials the last number
called from the connected cell
phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press / to answer the call.
Press / to ignore a call.
7-43