Advertisement
To Attach:
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Attach bowl and flat beater, dough
hook or wire whip to the mixer.
Lower and lock the motor head.
4. From the front of the mixer, slide
the Pouring Shield over the bowl
until the shield is centered. The
bottom rim of the shield should fit
inside the bowl.
KitchenAid
A limited one-year warranty extends
to the purchaser and any succeeding
owner for Pouring Shields operated in
Puerto Rico. During the warranty
period, all service must be handled by
an Authorized KitchenAid Service
Center. Please bring the Pouring
For service information, visit
KitchenAid.com or call toll free
1-800-541-6390, 8 a.m. to 8 p.m.,
Monday through Friday, 10 a.m. to
5 p.m., Saturday, Eastern Time or
Using Your Pouring Shield
Pouring
Chute
®
Pouring Shield Warranty
for Puerto Rico
Arranging for Service
after the Warranty Expires
To Use:
1. For best results, rotate the shield
so that the motor head covers the
u-shaped gap in the shield. This
will position the pouring chute just
to the right of the attachment hub
as you face the mixer.
2. Pour ingredients into the bowl
through the pouring chute.
To Scrape Bowl:
Note: Do not scrape bowl while the
mixer is running.
Turn mixer off. Slide the Pouring
Shield off the bowl, lift the mixer
head, and scrape.
To Clean:
Wash the Pouring Shield in warm,
soapy water or place it in the top rack
of your dishwasher.
Shield, or ship it prepaid and insured,
to the nearest Authorized Service
Center. Call toll free 1-800-541-6390
to learn the location of a Service
Center near you. Your repaired
Pouring Shield will be returned to you
prepaid and insured.
write to:
Customer Satisfaction Center
KitchenAid Portable Appliances
P.O. Box 218
St. Joseph, MI 49085-0218
3
Advertisement
