Nikon D300 User Manual page 251

II
Before Connecting the Camera
Install the necessary software from the supplied installer CD (see
the Install Guide for more information). To ensure that data
transfer is not interrupted, be sure the camera battery is fully
charged. If in doubt, charge the battery before use or use an EH-Sa
or EH-S AC adapter (available separately).
Before connecting the camera, select the
[USB] option in the camera setup menu (pg.
319) and choose a USB option from [MTP/
PTP] (default) and [Mass Storage] as
described below.
--. . _ ---Operatrng-
system*~'
--,
--'T-'NikonTraASfer-~eraControl
Pro 2
• Windows Vista (32-bit Home Basic/ :
i
Home Premium/Business/:
I
Enterprise/Ultimate editions)
I
Choose
I
-·r~~t~~~~~~~:~:6~:~:i:~~
0:4:j01
[~:~~:~~;:]
I
[~;~/~~P]
....~i~~.~~s~~~~~r~~~si~n~I
__
._J[~a~~~;;9~LJ
. .
* See
the websites listed on page xxiv for the latest information on supported
operating systems.
~
Windows 2000 Professional
Do
NOT
select [MTP/PTP] when using Nikon Transfer. If [MTP/PTP] is
selected when the camera is connected, the Windows hardware wizard
will be displayed. Click [Cancel] to exit the wizard, and then disconnect
the camera. Be sure to select [Mass Storage] before reconnecting the
camera.
El
225