Mariner 70 Service Manual page 7

General Specification
(continued)
NOTE: Other specification (torques, etc.) are listed in
the respective sections.
Horsepower
Idle RPM (in forward gear)
Full Throttle RPM Range
Piston Replacement
Cylinder Bore
Stroke
Engine Type
Ignition Type
Recommended Spark Plug
Cylinder Firing Order
Recommended Power Trim Fluid
Recommended Gasoline
Recommended Oil
Engine Weight ELO
ELOPT
Fuel Tank Capacity
Gear Housing Lubricant Capacity
Gasoline/Oil Ratio at Idle
Gasoline/Oil Ratio at W.O.T.
Gear Ratio
Oil Injection Tank Capacity
Tank Capacity
Maximum operation per tank
full of oil at W.O.T.
Oil remaining when warning
buzzer sounds
Operating time remaining at
wide open throttle when warn-
ing buzzer sounds
*Improves running quality between 1800 – 2000 RPM.
1-2
Model 100
100 (74.6 kw)
NGK-BPH8H-N-10* Gap - 0.040 in. (1.0mm)
Inductor Plug NGK BPZ 8H-N-10* Gap - 0.040 in. (1.0mm)
Quicksilver Power Trim & Steering Fluid or Automotive Transmission
Regular Leaded, Premium, Low-Lead and Lead-Free automotive gaso-
lines with a minimum pump posted octane rating of 86
GENERAL INFORMATION AND SPECIFICATIONS
650 - 700
4750 - 5250
105 (1720.9cc)
3.375 (85.7mm)
2.930 (74.4mm)
4 Cylinder, 2 Cycle
C.D. Breakerless
NGK-BUHW
1-3-2-4
Fluid (ATF) Type F, FA or Dexron II
Quicksilver 2-Cycle Outboard Oil
340 lbs.
360 lbs.
6.6 U.S. Gallons
(5 Imp. Gals.; 25 Liters)
22.5 fl. oz. (665.2ml)
80:1
50:1
2.07:1
1.4 gal. (5.3 liters)
5 hours
1 qt. (.95 liter)
50 min. approx.
Model 115
115 (85.8 kw)
90-13645--2 1095