Mariner 70 Service Manual page 339

7. Using a suitable mallet, drive upper pivot pin into
swivel bracket and through trim ram until pivot pin
is flush with swivel bracket.
a
a - Pivot Pin
b - Swivel Bracket
c - Trim Ram
90-13645--2 495
8. Drive upper retaining pin in until seated.
c
b
a - Retaining Pin
51515
9. Recheck fluid level.
10. Power trim may now be operated to lower out-
11. Reconnect power trim leads to relays under igni-
12. Reinstall spark plug leads to spark plugs.
13. Reinstall cowls.
14. Connect battery leads to battery terminals.
POWER-TRIM
a
board to desired position. Trim system is self
purging.
tion cover.
51505
6C-33