9. If bearing is rusted or does not roll freely, replace
bearing. Remove bearing and oil seals using
Mandrel* (91-36569) and Driver Rod* (91-37323).
Discard oil seals.
* From Bearing Removal and Installation Kit (91-31229A5).
c
b
a - Bearing
b - Mandrel (91-26569)
c - Driver Rod (91-37323)
10. Remove (if not removed with bearing in Step 9)
propeller shaft seals and O-ring.
a - O-ring
90-13645--2 1095
a
51264
a
51263
LOWER UNIT
11. Remove spring.
a
a - Spring
12. Apply constant pressure to cam follower to pre-
vent cam follower assembly from ejecting from
propeller shaft while pushing cross pin out of
clutch dog.
a
a - Cross Pin
b - Cam Follower
51876
b
51800
5A-13