Gamma; Aperture; Ezoom - Siemens CCWC1335-LP Instruction Manual

7.2.11 GAMMA

7.2.12 APERTURE

7.2.13 EZOOM

Siemens Building Technologies
Fire Safety & Security Products
WHITE BAL ATW2
GAMMA 0.45
APERTURE MID
EZOOM <SET>
MIRROR OFF
PRIVACY ZONE <OFF>
OPTION <SET>
REMODE <SET>
BACK EXIT CANCEL DEFAULT
Fig. 11 GAMMA
The values which can be selected are 0.45 and 1.0.
Move the cursor to the position shown in Fig. 11 to set GAMMA value.
Generally, the default value 0.45 is used for CCTV monitor. For image processing
purpose, 1.0 can be selected.
WHITE BAL ATW2
GAMMA 0.45
APERTURE MID
EZOOM <SET>
MIRROR OFF
PRIVACY ZONE <OFF>
OPTION <SET>
REMODE <SET>
BACK EXIT CANCEL DEFAULT
Fig. 12 APERTURE
This function is for setting the picture sharpness. (LOW, MID, HIGH).
Move the cursor to the position shown in Fig. 12.
Use the LEFT/ RIGHT button to choose HIGH, MID or LOW.
WHITE BAL ATW2
GAMMA 0.45
APERTURE MID
EZOOM <SET>
MIRROR OFF
PRIVACY ZONE <OFF>
OPTION <SET>
ID <SET>
BACK EXIT CANCEL DEFAULT
Fig. 13 EZOOM
This function is for setting the electronic zoom factor, up to 2.6 times.
Move the cursor to the position shown in Fig. 13.
Use the LEFT/ RIGHT button to open this menu item, then move the cursor left and
right to select the desired zoom factor. The maximum zoom factor is X2.6.
Installing the Camera
21
03.2005