White Bal - Siemens CCWC1335-LP Instruction Manual

Installing the Camera
7.2.10

WHITE BAL

20
Siemens Building Technologies
Fire Safety & Security Products
Using the LEFT/ RIGHT button to choose OFF, BLC1, BLC2, BLC3, BLC4, BLC5
or BLC6.
OFF The BLC function is off.
BLC1
Backlight compensation window:
(Center 1 window, smaller)
BLC2
Backlight compensation window:
(Center 2 Window, larger)
BLC3 Backlight compensation window:
(Top half of the window)
BLC4 Backlight compensation window:
(Bottom half of the window)
BLC5 Backlight compensation window:
(Center portion of the upper half)
BLC6 Backlight compensation window:
(Center portion of the lower half)
WHITE BAL ATW2
GAMMA 0.45
APERTURE MID
EZOOM <SET>
MIRROR OFF
PRIVACY ZONE <OFF>
OPTION <SET>
REMODE <SET>
NEXT EXIT CANCEL DEFAULT
Fig. 10 WHITE BAL
This function is for setting the white balance mode (ATW1, ATW2, and manual
mode).
Move the cursor to the position shown in Fig. 10.
Use the LEFT/ RIGHT button to choose between ATW1, ATW2, and manual mode.
ATW1
The TTL auto trace white balance algorithm is designed for perfect color
reproduction. The color temperature range is 2600°K-6000°K.
ATW2
The TTL auto trace white balance algorithm is designed for perfect color
reproduction. The color temperature range is 2500°K-10000° K.
Manual mode
Press the ENTER button to enter manual mode. To obtain correct manual white
balance, adjust the R and B (red and blue) values using the UP/ DOWN button.
To exit, use the LEFT/ RIGHT to move the cursor between R and B, and press
ENTER.
BLC1
BLC2
BLC 3
BLC 4
BLC5
BLC6
03.2005