D/N Mode - Siemens CCWC1335-LP Instruction Manual

7.2.1

D/N MODE

Siemens Building Technologies
Fire Safety & Security Products
D/N MODE AUTO
D/N LEVEL HIGH
D/N DELAY 15 sec
EXPOSURE <ALC>
SHUTTER 1/50
SENS UP OFF
GAIN NORMAL
SYNC LL:000
BLC OFF
NEXT EXIT CANCEL DEFAULT
Fig. 1 D/N MODE
This function sets the Day/Night mode to automatic, color, B/W or external control
of setting to B/W or color.
Move the cursor to the position shown in Fig. 1.
Use the LEFT/ RIGHT button to select AUTO, MONO, COLOR or MANUAL mode.
AUTO
When set to this mode, the camera will change to COLOR mode or B/W mode
automatically depending on a subject's brightness. (When GAIN sets OFF, auto
function can't be selected).
MONO When set to this mode, the camera remains in B/W mode
COLOR When set to this mode, the camera will remain in color mode.
MANUAL When set to this mode, the camera will be switched to color or B/W mode manually
according to a signal received at a terminal on the rear panel.
Installing the Camera
15
03.2005