If Status (Input Function Status); Dsp Bus Check - Yamaha RX-V861 Service Manual

18. IF STATUS (Input function status)

The status information is displayed in the hexadeci-
mal notation one after another by the sub-menu op-
eration.
For signal processing, the status before the sub-menu
operation is maintained.
* The details of the following status information
cannot be disclosed because of the development
purpose.
* The figures in the diagram are given as reference
only.
DST:3300020000
DMD:03C00000
DIF:0001000900
PC :0000
CSx:0000000000
DEI:0808000600
BSx:0000000000
MTT:0018001820
DGI:00000000400

19. DSP BUS CHECK

This menu is used to self-diagnose whether or not the
bus connection for the TI (DA70Y) and the external
ROM/RAM is made properly.
NoEr: No error detected.
Boot: When this indication is displayed with in sec-
onds or displayed alternately. "NoEr" and
"Boot", it is highly possible that there are er-
rors.
DSP status
Decode mode
DIR information
Pc
CHS 1- 2
DEC information
BSI 1-8
Mute trigger
Digital information
TI BUS:NoEr
RX-V861/HTR-6080/DSP-AX861SE/DSP-AX861
51