10. Press the [E.P.R...] button, and "Erase OK?" is
displayed. (Fig. 4)
Press the [OK] button and start writing. (Fig. 4)
11. When writing is completed, "Program Finished" is
displayed. (Fig. 4)
Press the [OK] button. (Fig. 4)
12. Disconnect the power cable of main unit from the
AC outlet.
13. End "FlashSta. exe."
14. Disconnect the RS232C cross cable, RS232C con-
version adapter and flexible flat cable.
Writing /
•
Confirmation of firmware version and checksum
Confirm the firmware is updated successfully with the
DIAG function.
For more information, refer to "SELF DIAGNOSIS
FUNCTION (DIAG)".
RX-V861/HTR-6080/DSP-AX861SE/DSP-AX861
When the [E.P.R...] button is pressed, "Erase OK?" is displayed.
When the [OK] button is pressed, writing is started.
Collating /
[OK] button
Writing completed /
Fig. 4
23