Pioneer DVR-220-S Service Manual page 88

1
Table 1: Key operations in General Setting mode
QQ
3 7 63 1515 0
Key
INPUT SELECT,
A
Switches inputs or channels.
CHANNEL +/–
(∗R)
Sets Sync AGC.
[SIDE A], [SIDE B]
[Rev ×3], [×3 Fwd]
Sets Threshold level.
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
B
Sets Threshold level.
[Rev SCAN],
Sets V-Sync Det.
[SCAN Fwd]
[Rev STILL STEP],
Sets Std Det.
[STILL STEP Fwd]
C
[SPEED +], [SPEED -] HD Err Det
Initializes the setting of General
CLEAR
Setting mode.
TE
L 13942296513
Exits AVIO setting for specific areas,
ESC
clearing the OSD.
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
∗1 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.
D
[Display in General Setting mode when the channel currently displayed has specific settings]
AVIO Specific Area Mode Ver*.**
Input - [tuner ]
Sync AGC : ON
Threshold : Normal
V-Sync Det : Normal
Std Det : Normal
HD Err Det : Normal
E
This channel is set up
individually.
www
F
88
1
http://www.xiaoyu163.com
2
Operation
*
*
*
*
*
x ao
y
. i
DVR-220-S
2
http://www.xiaoyu163.com
3
(effective only during recording/playback stop)
8
Setting (∗: Default)
–
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
• Normal:
The value is fixed, with no display of
the value.
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
Normal (∗) /Short/Long
Normal (∗) /Non STD
Normal (∗) /Fast/Stop
–
Q Q
3 6 7 1 3
–
u163
.
3
4
2 9 9 4 2 8
Remarks
–
–
–
–
–
–
–
–
–
–
Pressing the key resets all settings
of General Setting mode to the
initial values. Settings of Specific
Channel Setting mode are not
1 5 0 5 8 2 9 9 4
affected (they are retained).
–
m
co
4
9 9
2 8 9 9