Drain Hose Connection; Electrical Connection - Haier DW12-TFE3 Service Manual

Bom: FA06D0E03/FA06D0E04
Dishwasher

Drain hose connection

Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the
sink, making sure to avoid bending or crimping it. If necessary, fit a syphon trap (U-bend)
with a connecting piece for the drain hose (fig.C). The free end of the hose must be at a
height between 40 and 100 cm and must not be immersed in water.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home
correspond to those on the rating plate (located on the stainless steel inner door of the
appliance) and that the electrical system is correct for the maximum voltage on the rating
plate, insert the plug into an electrical socket which is earthed properly (the earthing of the
appliance is a safety requirement mandated by law).
If the electrical socket to which the appliance must be connected is not appropriate for the
plug, replace the whole cable, rather than using adaptors or the like as they could cause
overheating and burns.
Edition:2008-05
Model: DW12-TFE3/DW12-TFE3ME
Page 8 / 37