Installing Quick Image Navigator / Panasonic-Dms - Panasonic UB-5315 Operating Instructions Manual

Computer Interfacing
7
When the following window appears after files
are copied, power the electronic board on, and
connect a USB cable from the electronic
board to your computer.
8
Follow the on-screen instructions if the wizard
windows appear.
• If the wizard window is displayed to select
the file (##.inf) for the printer driver in
Windows XP, select "windows\inf\oem##.inf".
• If the wizard window is displayed to connect
to the Windows Update in Windows XP SP2,
select [No].
• If the warning dialog is displayed in
Windows 2000 / Windows XP, select [Yes] or
[Continue Anyway] to continue the
installation. In Windows Vista or Windows 7,
no warning window is displayed and
installation will continue.
• The new hardware wizard windows may be
displayed several times depending on the
operating system.
• For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required
9
When the installation is completed, click [OK].
24
.
Note
• If the Panaboard is powered on and connected to
the computer with a USB cable when [Exit] is
clicked after the installation is completed, the Board
Image Capture software will automatically start in
Windows 2000 / Windows XP / Windows Vista /
Windows 7. (For further details, refer to "Scanning
with the Board Image Capture" on page 26.)
■ Installing Quick Image Navigator /
Panasonic-DMS
After confirming your operating system, install the
software.
For Windows 2000 / Windows XP / Windows Vista /
Windows 7: Quick Image Navigator
For Windows 98 / Windows Me: Panasonic-DMS
If Panasonic-DMS is already installed, you do not
need to uninstall it.
1
Power on your computer and start Windows.
• Log on as an administrator for Windows 2000,
Windows XP, Windows Vista or Windows 7.
2
Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
• Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, double-click "Menu.exe" in
the CD-ROM from the Explorer.
• If the Autoplay dialog box appears in Windows
Vista or Windows 7, click "Run Menu.exe".
3
When "Welcome" window appears, click [Next].
4
Click [Download Quick Image Navigator].
• To download Quick Image Navigator and
Panasonic-DMS, your computer must be
able to access the Internet.