Initialization Of F, E Page Data; Initializing The F, E Page Data; Modification Of F, E Page Data - Sony Handycam DCR-PC1 Service Manual

1-2.

INITIALIZATION OF F, E PAGE DATA

1. Initializing the F, E Page Data

Note: If the F, E page data has been initialized, the following adjustments
need to be performed again.

1) Modification of F, E Page Data

2) Camera System Adjustments
Adjusting page F
Adjusting Address 10 to FF
Adjusting page E
Adjusting Address 00 to 3D
Initializing Method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 01, set data: 2D (NTSC) or data: 2F
(PAL), and press the PAUSE button of the adjustment remote
commander.
3) Select page: 6, address: 03, set data: 01, and press the PAUSE
button of the adjustment remote commander.
4) Select page: 6, address: 02, and check that the data is "01".
5) Perform "Modification of F, E Page Data".
2. Modification of F, E Page Data
If the F, E PAGE data has been initialized, change the data of the
"Fixed data-2" address shown in the following tables by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder
may not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing After Modifying Data:
1) Select page :2, address:00, set data: 29, and press the PAUSE
button of the adjustment remote commander.
2) Select page :2, address:01, set data: 29, and press the PAUSE
button of the adjustment remote commander.
3) Perform "Camera System Adjustments".
3. F Page Table
Note: Fixed data-1 : Initialized data ( Refer to "1. Initializing the F, E
Page Data".)
Fixed data-2 : Modified data (Refer to "2. Modification of F, E Page
Data").
Initial value
Address
PAL
NTSC
00 to 0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C 80 80
1D
1E 40 40
1F 5E 5E
20 90 B4
21 3E 55
22 43 86
23 59 7B
24 51 51
25 19 19
26 22 22
27 20 20
28 93 93
29 13 13
2A
2B
2C 64 64
2D
2E 22 22
2F
30 27 24
31
32
33
34 80 80
35 40 40
36 00 00
37 00 00
38 46 46
39 00 00
3A 19 19
3B 00 00
3C 2A 2A
3D 00 00
3E 80 80
3F 7A 7A
5-5
Remark
Fixed data-1
(Initialized data)
36MHz origin osc adj.
Fixed data-1
Hall adj.
AWB & LV standard data input
Flange back adj.
Fixed data-1
(Initialized data)
Max gain adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
(Initialized data)
Auto white balance adj.
Flange back adj.
AWB & LV standard data input