6. FL/OSD CHECK
Use this program to check the FL display section and
video control section. When checking the video con-
trol section, prepare a monitor, S video cable and
video pin cable and connect them.
Using the sub-menu operation, selection items of the
FL display section and video display section vary as
shown below.
For audio signal processing, use STRAIGHT.
Checking FL display section /
Initial display /
All segments OFF /
All segments ON (dimmer 100 %) /
All segments ON (dimmer 50 %) /
Lighting of segments in lattice /
Lighting in lattice /
Short /
Normal /
RX-V461/HTR-6040/DSP-AX461
Check of the Video control section. (Monitor out) /
Initial display (OSD OFF) /
OSD OFF /
OSD OFF /
OSD characters ON /
OSD characters ON /
OSD characters /
27