Yamaha RX-V461 Service Manual page 13

RX-V461/HTR-6040/DSP-AX461
4. 6CH INPUT
The input source [MULTI CHANNEL INPUT] is se-
lected.
It is possible to select the 6-ohm/8-ohm by using the
sub-menu.
6 ch INPUT 6-ohm
INPUT: MULTI CH INPUT
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Sub-menu
6 ch INPUT 6-ohm
6 ch INPUT 8-ohm
INPUT: MULTI CH INPUT
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Sub-menu
6 ch INPUT 8-ohm
LIM/PLDET/THM
LIM: Setting value of LIM (Limiter control)
* As this is a development menu, do not
change the setting value.
PLDET: Power limiter detection
The A/D conversion value during operation
is displayed.
THM: Thermo protection detection
The A/D conversion value during operation
is displayed.
(Reference voltage: 3.3 V=255)
5. MIC CHECK
The signals input through the microphone are output
of FRONT L/R via A/D and D/A.
26
4.6ch INPUT 6 Ω
Input level Volume
Both ch, -20 dBm +6.0 dB
4.6ch INPUT 8 Ω
Input level Volume
Both ch, -20 dBm +6.0 dB
4.255:255: 83
5.MIC CHECK
4. 6CH INPUT
SPEAKER OUT
FRONT CENTER
+11.5 dBm +11.5 dBm
SPEAKER OUT
FRONT CENTER
+11.5 dBm +11.5 dBm
THM (Thermo protection detection /
PLDET (Power limiter detection /
LIM (Limiter control /
SUBWOOFER
SURROUND OUTPUT
+11.5 dBm -3.5 dBm
SUBWOOFER
SURROUND OUTPUT
+11.5 dBm -3.5 dBm
)
)
)