Problems When Projection Starts; Problems When Projection Starts; The Projector Does Not Turn On; The Projector Does Not Turn On S - Epson EB-955WH User Manual

Problem Solving
Check
Are you using the projector at a high altitude or in a location subject
to high temperatures?
Is it projecting outside of the recommended projection distance
range?

Problems when Projection Starts

The projector does not turn on

Check
Did you press the [t] power button?
Are the indicators switched off?
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this
Is the Control Panel Lock set to Full Lock?
Is remote control operation restricted?
The screen may become dark when using at high altitude or in a location subject to high temperatures. Although you
cannot make Power Consumption settings at this time, you can continue to use the projector.
The image becomes darker if the projection distance is too large. Setup within the recommended range.
s "Screen Size and Projection Distance"
Press the [t] power button to turn the power on.
The power cord is not connected correctly or power is not being fully supplied.
Disconnect and then reconnect the power cord.
s "Turning On the Projector" p.39
Check that your electrical outlet or power source is functioning correctly.
does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Press the [t] power button on the remote control. If you do not want to use Control Panel Lock, change the setting to
Off.
s Settings - Control Panel Lock p.105
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.105
Remedy
p.155
Remedy
141