Epson EB-955WH User Manual page 13

Part Names and Functions
Name
A
Air exhaust vent Exhaust vent for air used to cool the projector internally.
B
Slide the knob to open and close the A/V mute slide.
A/V mute slide knob
C
Foot adjust lever Press the foot adjust lever to extend and retract the front
adjustable foot.
s "Adjusting the Image Position"
D
Front adjustable foot When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s "Adjusting the Image Position"
E
A/V mute slide Close when not using the projector to protect the lens. By
closing during projection you can hide the image and the
sound.
s "Hiding the Image and Sound Temporarily (A/V
Mute)"
F
Projection lens Projects images.
G
Remote receiver Receives signals from the remote control.
Function
Warning
Do not look into the vents. If the lamp explodes,
gases may escape and small fragments of glass may
be scattered which could cause an injury. Contact
a doctor if any fragments of broken glass are in-
haled or get into the eyes or mouth.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
p.52
p.52
p.71
Name
H
Focus ring Adjusts the image focus.
s "Correcting the Focus"
I
Adjusts the image size.
Zoom ring
(Except for EB-S29/EB-
s "Adjusting the Image Size"
S27)
J
Takes in air to cool the projector internally.
Air intake vent
(air filter)
s "Cleaning the Air Filter"
K
Air filter cover Opens and closes the air filter cover.
s "Replacing the Air Filter"
L
The security slot is compatible with the Microsaver
Security slot
Security System manufactured by Kensington.
s "Anti-Theft Lock"
M
Operates the projector.
Control panel
s "Control Panel"
N
Corrects horizontal distortion in the projected image.
Horizontal keystone
adjuster
s "Correcting manually"
O
Lamp cover Open when replacing the projector's lamp.
s "Replacing the Lamp"
P
Lamp Cover Fixing Screw to fix the lamp cover in place.
Screw
13
Function
p.52
p.51
p.146
p.151
p.86
p.17
p.48
p.148