Other Problems; No Sound Can Be Heard Or The Sound Is Faint; There Is Noise In The Audio (When Projecting Easymp Network Projection, Easymp Multipc Projection, Usb Display, Or Quick Wireless Connection); No Sound Can Be Heard Or The Sound Is Faint S - Epson EB-955WH User Manual

Problem Solving

Other Problems

No sound can be heard or the sound is faint

Check
Check that the audio/video cable is securely attached to both the
projector and audio source.
Is the volume for the projector or the connected equipment set to the
minimum?
Is the Mic Input Level set at the maximum?
Is A/V Mute active?
Is the audio cable's specification "No resistance"?
Is it connected with an HDMI cable?
Is Output audio from the projector selected?
(Only when projecting in USB Display, when projecting one screen
in EasyMP Network Projection, or one screen in EasyMP Multi PC
Projection.)
There is noise in the audio (when projecting EasyMP Network Projection, EasyMP MultiPC Projection, USB Display, or Quick Wireless
Connection)
Check
Is the volume for the computer set to the minimum while the
projector is set to the maximum?
Disconnect the cable from the Audio port, and then reconnect the cable.
Adjust the volume so that sound can be heard.
s Settings - Volume p.105
s "Adjusting the Volume" p.53
Lower the Mic Input Level.
s Settings - Mic Input Level p.105
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
When using a commercially available audio cable, make sure it is labeled "No resistance".
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Output audio from the projector.
When projecting in EasyMP Network Projection or EasyMP Multi PC Projection: In the software you are using, select
Output audio from the projector from the Audio Output tab in Set options.
If the volume for the computer is set to the minimum while the projector is set to the maximum, the noise may be mixed.
Turn up the computer's volume and turn down the projector's volume.
Remedy
p.71
Remedy
142