Disassembly; Top Cover; Loader Panel, Front Panel; When The Disc Tray Can Be Ejected Electrically - Denon DVD-2900 Service Manual

DISASSEMBLY

QQ
3 7 63 1515 0
(Follow the procedure below in reverse order when reassem-
bling.)

1. Top Cover

(1) Remove 10 screws on the top and both sides, and 2
screws on the rear.
(2) Widen the Top Cover a little laterally, then detach it with
sliding in the arrow direction.

2. Loader Panel, Front Panel

2.1. When the Disc Tray can be ejected electrically

(1) After removing the Top Cover, proceed as follows.
TE
L 13942296513
(2) Plug the power cord to the wall outlet, switch on the pow-
er, and press the "OPEN/CLOSE" button to open the
Disc Tray.
(3) Detach the Loader Panel by lifting it in the arrow direc-
tion.
(4) Press the "OPEN/CLOSE" button to close the Disc Tray,
then unplug the power cord.
(5) Disconnect the wire (CX025, CX061) connecting the
Front Panel's P.W.B. and the power PWB in the Chassis.
(6) Remove 4 top screws and 4 bottom screws, then detach
the Front Panel to the arrow direction.
(7) Disconnect the FFC (CX171) connecting the Front Pan-
el's P.W.B. and the main P.W.B. in the Chassis.
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
3
DVD-2900
9 4 2 8
0 5 8 2 9 9 4 2 8
m
3
9 9
9 9