Execution Of Trace Mode (Error Rate Display); Other Operation - Denon DVD-2900 Service Manual

QQ
(b) In the case of trace mode (error rate display) (refer to ta-
3 7 63 1515 0
ble 2 trace mode details)
FL display (The display part of 13 digits)
(YY: select mode [71--94] ,F: address and an error rate display F at the
time of undecided)

(5) Execution of trace mode (error rate display)

(refer to table 2 trace mode details)
• Trace will be performed if the PLAY button is pushed after
choosing operation.
FL display (The display part of 13 digits)
(YY:select mode[71--94],m:address[PBA][HEX],
l:error rate[COUNT/SEC][HEX])
(Note) Renewal of data is carried out for every CD:300 frame and
DVD:85ECC block.
• The mode chosen when selection mode was changed into
the trace execution and the PLAY button was pushed is
performed from the beginning.When the PLAY button is
pushed without changing selection mode, the mode under
selection is performed from the beginning.(If the PLAY
button is pushed, the address corresponding to the cho-
sen mode will be searched again.)

(6) Other operation

(a) If the STOP button is pushed into servo adjustment val-
ue display mode and trace mode (error rate display), it
will return to the state at the time of a test mode injection.
TE
L 13942296513
FL display (The display part of 13 digits)
(b) Push the OPEN/CLOSE button twice and carry out ser-
vo readjustment in OPEN operation ->CLOSE opera-
tion.
(It readjusts with test mode.)
OPEN display
CLOSE display
LOADING display
FL display (The display part of 13 digits)
(c) By pressing STOP button and REV button simulta-
neously in the test mode, it returns to heat-run mode.
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
16
DVD-2900
9 4 2 8
0 5 8 2 9 9 4 2 8
m
16
9 9
9 9