Replacing The Vacuum Bag - Maytag M500 Owner's Manual

MAIntenAnCe AnD CARe

Replacing the Vacuum Bag

NOTE: Unplug the vacuum cleaner
from the electrical outlet before
changing the bag.
• Unzip the bag compartment.
• Remove the used vacuum bag by
pulling the green bag collar tab away
from the vacuum (Fig. 1). Slide the
used bag out of the bag holder which
automatically seals the bag opening
(Fig. 2). Discard the used bag.
• To install a new bag, slide the bottom
of the green bag collar into the bag
holder until it snaps into place (Fig. 3).
• Push the top of the bag collar
upward until the collar "snaps" into
place on the vacuum (Fig. 4).
• Tuck the bag corners into the bag
compartment then zip the bag
compartment closed.
MATERIAL
DRAWN
ISSUED
SCALE
1.000
6
MATERIAL
DRAWN
ISSUED
SCALE
1.000
6
8
Fig. 1
Fig. 2
FINISH
DATE
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
DATE
THIS DRAWING IS ISSUED FOR ENGINEERING
.02 IN RADII X.X ± .02
INFORMATION ONLY. IT MAY NOT BE REPRO-
.01 IN X,XX ± .01
DUCED, NOR MAY THE INFORMATION HERE IN
.005 IN MACHINE SURFACE
BE USED FOR MANUFACTURING PURPOSES
.0005 IN BREAK SHARP CORNERS TO .010 MAX
WITHOUT WRITTEN PERMISSION FROM TACONY
0 ° 30" COMMON TO BE CONCETRIC TO .002
CORPORATION.
7
Fig. 3
FINISH
DATE
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
DATE
THIS DRAWING IS ISSUED FOR ENGINEERING
.02 IN RADII X.X ± .02
INFORMATION ONLY. IT MAY NOT BE REPRO-
.01 IN X,XX ± .01
DUCED, NOR MAY THE INFORMATION HERE IN
.005 IN MACHINE SURFACE
BE USED FOR MANUFACTURING PURPOSES
.0005 IN BREAK SHARP CORNERS TO .010 MAX
WITHOUT WRITTEN PERMISSION FROM TACONY
0 ° 30" COMMON TO BE CONCETRIC TO .002
CORPORATION.
7
Fig. 4
DESCRIPTION
DRAWING SIZE
PART NUMBER
SHEET 1 O
8
DESCRIPTION
DRAWING SIZE
PART NUMBER
SHEET 1 O
8