Assembling The Vacuum - Maytag M500 Owner's Manual

Hide thumbs Also See for M500:
Table of Contents

Advertisement

Attaching the Handle to the Vacuum
NOTE: Do not plug in the vacuum until it is
completely assembled.
The vacuum cleaner and the handle are
packed seperately and require assembly.
• Thread the cord through the lower and upper
cord guides on back of the vacuum bag. (Fig. 1).
• Remove the handle bracket by removing the
two screws (Fig. 2).
• Place handle onto the back of the vacuum,
aligning holes with pegs (Fig. 3).
• Place the handle bracket back into position (Fig. 4).
• Secure with two screws removed in Step 2.
• Open the bag compartment to ensure a
vacuum bag is in place.
• Your vacuum is now ready for use.
• If storing the vacuum, wrap the cord clockwise
around the top and bottom cord hooks. Fasten
the plug to the wrapped cord using the channel
on the plug.
Unwinding the Power Cord
• The lower cord hook rotates to allow for
quick access to the power cord. Turn the
lower cord hook upward and you can quickly
drop the power cord to the floor without
unwinding it from the cord hooks.
• When storing the vacuum cleaner, turn the lower
cord hook to the downward position and wind the
power cord around the cord storage hooks.

AsseMbLIng tHe VACUUM

1
2
3
D
C
B
A
Fig. 1
1
2
3
Fig. 3
5
4
5
6
Fig. 2
MATERIAL
FINISH
DRAWN
DATE
ISSUED
DATE
SCALE
1.000
DO NOT SCALE
4
5
6
Fig. 4
7
8
SHEET
PART
1 OF 1
DESCRIPTION O
TACONY CORPORATION
DESCRIPTION
1760 Gilsinn Lane, Fenton, MO 63026
UNLESS OTHERWISE SPECIFIED
TACONY CORPORATION CLAIMS PROPRIETARY
D
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
PA
X.X
±
.02 IN RADII X.X
±
.02
INFORMATION ONLY. IT MAY NOT BE REPRO-
X.XX
±
.01 IN
X,XX
±
.01
DUCED, NOR MAY THE INFORMATION HERE IN
X.XXX ± .005 IN MACHINE SURFACE
BE USED FOR MANUFACTURING PURPOSES
X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX
WITHOUT WRITTEN PERMISSION FROM TACONY
±
0 ° 30" COMMON
TO BE CONCETRIC TO .002
CORPORATION.
S
7
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents