Table of Contents
Advertisement
This fireplace system has been tested and listed in
accordance with
been listed by Underwriters Laboratories Inc. for installation
and operation in the United States and Canada as described
in this manual.
This fireplace has been tested and listed for use with the
optional components listed on page 5. These optional
components may be purchased separately and installed at
a later date. However, installation of an outside air kit will
require significant reconstruction, and should be installed
at the time of the initial fireplace installation.
B. DESCRIPTION OF THE FIREPLACE SYSTEM
Fireplace/Integral Grate
Refractory
Chimney Termination Cap
Chimney System
Hearth Extension
Glass Doors
Chimney Air Kit
Outside Combustion Air System
Fan Kit
Note:
Illustrations used throughout these instructions
reflect “typical installations” and are for design purposes
only. Actual installation may vary slightly due to indi-
vidual design preferences. However, minimum and maxi-
mum clearances must be maintained at all times.
The illustrations and diagrams used throughout these
installation instructions are not drawn to scale.
4
A. LISTINGS AND CODE APPROVALS
and
standards, and has
17789 Rev H
NA SERIES INSTALLATION INSTRUCTIONS
Check with your local building code agency prior to installing
this fireplace to ensure compliance with local codes,
including the need for permits and follow-up inspections. If
you need assistance during installation, please contact your
local dealer or the Heatilator Technical Services
Department, Hearth & Home Technologies, 1915 W.
Saunders St., Mt. Pleasant, Iowa 52641 (1-800-843-2848).
Heatilator® is a registered trademark of Hearth & Home
Technologies Inc., Division, HON INDUSTRIES.
WARNING!
07/03
Hide quick links:
Advertisement
Table of Contents
