Godrej ET16C2E Eyetrace Elite User Manual page 40


The address is not correct.

When multiple transformers are connected, the power supply is not large enough. Please give each transformer individual power supply.

The distance is too far.
18. Alarm cannot be recessional.
Possible reasons are as followed:

The setting of the alarm is not correct.

The alarm output Is turned on manually.

The input machine is damaged or the connections are not correct.

There are some problems for specific program edition, please update the program.
19. Alarm is not working.
Possible reasons are as followed:

The setting of the alarm is not correct.

The connection of the alarm is not correct.

The alarm input signal is not correct.

An alarm is connected with two loops synchronously.
20. The remote controller is not working.
Possible reasons are as followed:

The remote control address is not correct.

The remote control distance is too far or the angle is too large.

The battery is used up.

The remote controller or the front panel of the recording machine is damaged.
21. The storage time is not enough.
Possible reasons are as followed:

Front vidicon quality is bad. The lens is too dirty. The vidicon is in backlighting installation.

The hard disk capability is not enough.

The hard disk is damaged.
22. The downloading file cannot play.
Possible reasons area as followed:

There is no media player.
40
Digital Video Recorder: User Manual