ID Tech Econoscan II Programming Manual page 3

All of these codes and more are found in the ID Tech Econoscan II user manual found here:
http://www.idtechproducts.com/index.php?option=com_docman&task=cat_view&gid=435&It
emid=83
Reset to factory defaults (usually not necessary)
Before you program any configuration to your scanner you must first scan a "Start
Configuration" barcode
After you have programmed the desired configuration to your scanner you must scan a "End of
Configuration barcode
Carriage Return (simulates Enter key) - Use this if when you scan a barcode, you have to press
enter to get the item # onto the invoice grid
1-866-468-5767 International Point of Sale
3
201-928-0222 555 Cedar Lane Teaneck,
New Jersey 07666