Control Board Voltage Test - Lincoln Electric INVERTEC V250-S Service Manual

F-31 F-31
TROUBLESHOOTING & REPAIR

CONTROL BOARD VOLTAGE TEST

WARNING
Service and repair should be performed only by Lincoln Electric factory trained per-
sonnel. Unauthorized repairs performed on this equipment could result in danger to
the technician or the machine operator and will invalidate your factory warranty. For
your safety and to avoid electrical shock, please observe all safety notes and precau-
tions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform
the tests/repairs safely, contact the Lincoln Electric service department for technical
troubleshooting assistance before you proceed.
Call (216) 383-2531 or (800) 833-9353 (WELD).
_____________________________________________________________
TEST DESCRIPTION
This test will aid the technician in determining if the control board or some other machine
component may be faulty.
MATERIALS NEEDED
Voltmeter/ohmmeter (Multimeter)
Wiring diagram.
Control board schematic drawing.
INVERTEC V250-S