Renault MEGANE Driver's Handbook Manual page 26

fRONT sEATs WITH ELEcTRIc cONTROL WITH sTORAgE Of sETTINgs
It is possible to store three driving po-
sitions.
A driving position includes the settings
for the seat base and seatback of the
driver's seat.
The system operates:
– with the "hands-free" card de-
tected or, depending on the vehicle,
RENAULT card in the card reader;
– when the driver's door is opened.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
1.20
3
2
1
5
storing your driving position
– Adjust the seat using switches 4
and 5 (see previous page);
– press one of buttons 1, 2 or 3 until a
beep is heard: the driving position is
stored;
– to store other driving positions repeat
this procedure with the other but-
tons.
Recalling a stored driving
position
With the vehicle stationary, briefly
press button 1, 2 or 3 depending on the
required stored driving position.
Note: recall of the stored driving po-
sition is interrupted if one of the seat
4
adjustment buttons is pressed during
recall.
When driving, it is not possible to
recall a driving position.
We would advise you not
to recline the seatbacks too
far to ensure that the effec-
tiveness of the seat belts is
not reduced.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.