Setup Mode
Pressing the right (enter) button twice from the default volume display accesses the Setup menu, and the
up/down buttons can then be used to access the various options.
S
e
t
u
T
r
i
m
After selecting the desired option pressing the right button again displays the current parameter value,
and the up/down buttons can be used to alter the value.
Pressing the left (exit) button exits the parameter level and allows other options to be selected.
T
r
i
m
+
Set Up Menu Options:
Trim
Analogue In Sens
Source
HF Shelf
LF Shelf
LF Rolloff
LF Rolloff Freq
BL Timeout
p
0
0
.
0
Input trim level (-8.00dB to +7.87dB)
Input sensitivity (+4dB to +20dB)
Selects input source
(Analogue XLR, Analogue RCA, Main AES3 left, Main AES3 right)
Adjusts HF cut/boost level
Range: -4dB to +4dB in increments of 0.125dB
Adjusts LF cut/boost level
Range: -4dB to +4dB in increments in 0.125dB
Switches the 6dB/octave bass roll-off slope On or Off.
Selects the roll-off turnover frequency
Frequency options: 50, 80, 120, 150, or 200Hz
Sets the time after which the LCD backlight will switch off.
Options: 30 sec, 2 min, 5 min, off (no timeout)
0
d
B