Assembly - Sanchez SS-100 Owner's Manual

ASSEMBLY

THE PIANO STAND IS OPTIONAL. IF YOU DO NOT HAVE THE STAND, PLEASE
IGNORE THE SECTION 1 - 3 THAT INVOLVE THE STAND ASSEMBLY.
1
CHECK THE
PACKAGE
CONTENTS
5.
6.
7.
8.
11.
12.
2
ASSEMBLE
THE PIANO
STAND
6
Please make sure your package contains the following items
prior to assembly.
ITEM
1. PIANO ......................................................... 1
2. LEFT STAND LEG ...................................... 1
3. RIGHT STAND LEG .................................... 1
4. FOOT .......................................................... 2
5. BRACKET ................................................... 4
6. INSERT WITH THREADED HOLE ............. 4
7. 4X12 SCREW ............................................. 20
8. M6X70 SCREW .......................................... 4
9. CROSS BOARD ......................................... 1
10. CROSS BOARD BRACKET ....................... 2
11. M6X30 SCREW .......................................... 4
12. M6X30 KNOB SCREW ..................................4
ASSEMBLE THE STAND LEG
1. Align the circular holes on bracket with the left and right
stand legs.
2. Insert the 4X12 screws in to the
holes and fasten.
3. Place the threaded Insert in to the hole on the stand leg.
Rotate the threaded Insert using a screw driver to align
the screw holes with the hole in the foot bottom.
QTY