Split Point For Lower Voice; Split Point For Auto Accompaniment - Sanchez SS-100 Owner's Manual

FUNCTION
5.
CHANGING THE SPLIT POINT FOR LOWER VOICE - When the lower
LOWER
1.
2.
3.
4.
5.
SINGLE
CHANGING THE SPLIT POINT FOR AUTO ACCOMPANIMENT - The
FINGERED
PIANO
ACCOMP
1.
2.
3.
4.
Note: You can find the key number in the Appendix Drum Kit List.
To exit the setup mode press any control button except the +/YES, -/
NO or the FUNCTION button.
mode is engaged the keyboard is divided into two parts at the split
point. In the right hand section the original or Upper voice will
sound. In the left hand section a new instrument voice can be
assigned, the lower voice. The split point for the Lower section
can be changed in the Function feature.
Press the FUNCTION button.
Press the PAGE or the PAGE
menu appears.
Press the +/YES button to confirm your selection and the current
voice split point will be shown.
Use the +/YES button to shift the split point up the keyboard, to the
right, and the –/NO button to shift the split point down the
keyboard, to the left. The number pad can also be used to enter
the split point directly (by key number) from G2–C7. Press the +/
YES, –/NO buttons simultaneously to recover the default setting of
G3.
To exit the setup mode press any control button except the +/YES, -/
NO or the FUNCTION button.
split point that divides the keyboard can also be changed in the
function menu.
Press the FUNCTION button.
Press the PAGE or the PAGE buttons until the "Auto A.Split"
menu appears.
Press the +/YES button to confirm your selection and the current
auto accompaniment split point will be shown.
Use the +/YES button to shift the split point up the keyboard, to the
right, and the –/NO button to shift the split point down. The number
pad can also be used to enter the split point directly (by key
number) from A0–C3. Press the +/YES, –/NO buttons simulta-
neously to recover the default setting of G2.
Split Point
buttons until the "Split Point"
Auto A.Split
33