Auto Harmony Type Selecting; Master Tune - Sanchez SS-100 Owner's Manual

FUNCTION
HARMONY
34
AUTO HARMONY TYPE SELECTING - When the HARMONY button is
engaged, a single note on the right-hand section of the keyboard
will sound with additional auto harmony notes, when the auto
accompaniment is engaged. There are four types of harmony that
can be selected.
Duet adds a harmonizing note sounding below the single right hand
note that you supply when the chord accompaniment is playing.
Close harmony adds two harmonizing notes sounding below the
single right hand melody note that you supply, when the chord accom-
paniment is playing.
Open harmony
Octave add a note one octave below the note you play in the right
hand section of the keyboard when the chord accompaniment is
playing.
1. Press the FUNCTION button, then the +/YES button to confirm.
2. Press the PAGE
menu appears.
3. Press the +/YES button to confirm your selection. The current har-
mony type will be shown.
4. Use the +/YES or –/NO button to select a harmony type.
5. To exit the setup mode press any control button except the +/YES,
-/NO or the FUNCTION button.
MASTER TUNE - The pitch of this piano is very accurate and stable, it is
automatically set to standard A440 pitch when the piano is turned
on. The tuning feature makes it possible to tune the pitch of the
instrument in fine intervals. If necessary, you can alter the piano
pitch. Tuning can be accomplished over –50 to +50 semitone
steps, or cents.
1. Press the FUNCTION button.
2. Press the PAGE
ter Tune" menu appears.
3. Press the +/YES button the tuning value will be shown.
4. Use the +/YES button to increase the value or the –/NO
buttons to decrease the value. Press the +/YES, –/NO
buttons simultaneously to recover the default setting of
00.
5. To exit the setup mode press any control button except the
+/YES, -/NO or the FUNCTION button.
or the PAGE buttons until the "Harmony Type"
Harmony Type

Master Tune

or the PAGE buttons until the "Mas-