Layer (Dual); Lower (Split) - Sanchez SS-100 Owner's Manual

KEYBOARD VOICES
USER 1
USER 2
A / B
LAYER
LOWER
number will show on the display. Please refer to the back of the manual
for a list of all available voices.
USER DEFINED QUICK SELECTION BUTTON - You can assign a
favorite voice to the voice quick select button in the follow manner.
1. Press the voice USER button, USER 1 from Line A, or USER 2 from
Line B to recall the current stored voice (User key LED On). The
default user voices are USER 1= 012; Vibraphone, USER 2=092;
Choir Pad.
2. If you want to assign your desired voice to the USER button, press
and hold down the User key for 2 or 3 seconds, the User key LED
will blink to indicate store mode
3. Select the desired voice by using the numeric pad or the +/YES, –/
NO buttons. Please note: you cannot use Voice quick select
buttons.
4. Press the USER button again to store the voice. The indicator stays
On. The currently selected voice will be assigned to this button to
be available for quick selection.
If another voice is selected while User Key is ON but the indicator
does not blink for store mode, the new voice will become the active
voice. When User mode exits, the User indicator turns Off.
5.
User Key assignments will be saved after Power Off.
LAYER (DUAL) VOICE - Layer, or dual, refers to an additional voice that
is tone mixed with the selected keyboard voice. The assigned
layer voice will be heard with the original voice when the layer
feature is engaged.
1. Press the LAYER button, the currently assigned layer voice will
show on the display, and the indicator will light up.
2. Use the +/YES, –/NO buttons or the numeric pad to select the de-
sired voice. The display will show the layer voice number and
name,
3. Press the LAYER button a second time within 3 seconds and the
current layer volume level will show on the display. Use the +/
YES, –/NO buttons to adjust the layer volume level. Otherwise, this
procedure will be skipped.
After three seconds the display will revert to the selected main voice.
4. Press the LAYER button again to turn the feature off.
LOWER VOICE - In the lower, or split, mode the keyboard is divided into
two sections. To the right of the Split Point the currently selected
main voice, or the layer voice will sound. The keys to the left of the
21